1 / 5
Model No. : | XF20/25 |
---|---|
Brand Name : | एक्सएफ |
Applicable industry : | Building Material Shops |
Cangzhou, Hebei, China
उत्पाद वर्णन
यह आर्मेनिया के लिए डबल लेयर रोल बनाने की मशीन है। ऊपरी परत रूफ रोल बनाने की मशीन के लिए है, और नीचे की परत आईबीआर रोल बनाने की मशीन के लिए है। रूफ शीट बनाने की मशीन की शक्ति 5.5+5.5Kw है। रूफिंग शीट मशीन की चौड़ाई खिला सामग्री 1250 मिमी है। अगर आपको शीट मेटल रोल बनाने की मशीन की जरूरत है तो कृपया मुझसे संपर्क करें। यदि आप अपनी इच्छित मशीन की ड्राइंग प्रदान कर सकते हैं तो हम अनुमानित मूल्य मुक्त कर देंगे।
धातु छत टाइल बनाने की मशीन
उपकरण विस्तृत पैरामीटर
No |
|
|
1
|
Suitable Material |
Colored Steel plate, Galvanized Board,Aluminum Plate |
2
|
Width of the raw material |
1250mm |
3 |
Rows of rollers |
Upper level :11 Rows Down level :13 Rows |
4 |
Appearance size |
8600*1550*1910mm |
5 |
Total power
|
5.5+5.5KW |
6 |
Thickness of raw material |
0.3-0.6mm |
7 |
Productivity |
Upper level :0-2m/min Down level:0-15m/min |
8 |
Diameter of shaft |
¢70mm |
9
|
Voltage |
380V 50Hz 3phases |
Manual Uncoiler
|
Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:5000KG.Inner diameter: 500-508mm |
Main Roll Forming Machine
|
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped. |
Hydraulic System AND Computer Control Cabinet
|
Hydraulic oil: 40# hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use PLC: EURA(Can customize as customer require) |
Press Form |
Material of blades: Cr12,quenching treatment |
Shearing Mechanism
|
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment |
Output Table
|
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products. |
विस्तार कोटेशन के लिए, कृपया संपर्क बेलो w
Cangzhou, Hebei, China
इस आपूर्तिकर्ता को अपनी जांच भेजें