1 / 5
Model No. : | ZT-002 |
---|---|
Brand Name : | Zhongtuo |
Forming Steps : | 18 Steps |
Cangzhou, Hebei, China
उत्पाद वर्णन
स्लॉटेड स्ट्रट चैनल बनाने की मशीन का इस्तेमाल 41 * 21, 21 * 21 स्लॉटेड चैनल, छाया चैनल, सी चैनल बैच में किया जा सकता है और पूरी प्रक्रिया पूरी तरह से स्वचालित है।
अनस्टट्रुट 41x21 स्लॉट और 21x21 जस्ती इस्पात फिक्सिंग के Ω STRUT बिजली, औद्योगिक और नागरिक के निर्माण में फिक्सिंग और विधानसभा कार्यों में समय और धन की बचत, गति और स्थापना में आसानी है। समर्थन के इन तत्वों को स्लॉटेड स्टील सेडज़िमिर जस्त और गर्म डुबकी गैल्वनाइजिंग के साथ उपलब्ध हैं।
मशीन डिज़ाइन के लिए, हम गियरबॉक्स को संचरण के रूप में उपयोग करते हैं ताकि यह सुनिश्चित हो सके कि मशीन स्थिर काम कर रहा है और फिर कच्ची सामग्री की सतह को नुकसान नहीं पहुंचाता है। आम तौर पर हम स्टेनलेस या जस्ती स्टील का उपयोग करेंगे।
आपके refernece के लिए यहां कुछ ड्राइंग प्रोफाइल हैं :
बाजार में, सादे सी स्लॉटेड चैनल है, और फिर छेद को छिद्रण भाग को बचाएं।
निम्नलिखित भाग में, मशीन के पैरामीटर की जांच करें :
मशीन घटक :
1 |
Manual decoiler |
1 set |
2 |
Leveling Machine |
1 set |
3 |
Roll Forming |
1 set |
4 |
Hydraulic Cutting |
1 set |
5 |
PLC Control System |
1 set |
6 |
Hydraulic Station |
1 set |
7 |
Run-out Table-(Un-powered) |
1 set |
1. Decoiler 3 Ton passive de-coiler with brake device Outside diameter of coil: 550mm Inside diameter of the coil: 450mm |
||
2. Feeding and leveling rollers: Rollers: 4 steps, leveling Rollers: 9pcs Diameter: 80mm Leveling thickness: 3.5mm
Feeding
speed: 20m/min
Punching device
|
||
3. Main forming machine : 1) Forming steps: 18 steps 2) Outer diameter: 70mm 3) Machine frame (type): memorial arch frame, Thickness of memorial arch frame: 30mm
4)
Roller information: B. Quenched degree: 56-58°C 5) Shaft material: 45# steel with heat treat and hard chrome plated on the surface 6) Main motor power: 18.5kw, Reducer ratio: 1:14, Reducer Type: Hardened reducer 7) With cooling device
|
||
4. Siemens control system with English 1). PLC brand: Siemens 2). Transducer brand: Siemens 3). Automatic length and quantity measurement 4). Stop control switch, to ensure the safety of production 5). Control station: Used to control product length and quantity, automatically cutting to length and stop when required quantity is achieved. 6). Error for length needs to be easy to adjust. |
||
5. Gearbox transmission: Gearbox transport A. Gear material: 42CrMo B. Processing technical: hardening gear grinding processing C. Gear lubrication system: automatic oil drip by computer control, oil drip time and amount can be controlled according the needs. D.Gear cooling system: Automatic cooling circulation tank, which can guarantee not to exceed the gear temperature limit.
|
||
7. Non-stop hydraulic cutting device
1).
Servo motor power: 5.5kw 4). Hydraulic cutting after forming, no distorting or wasting. High level safety factor. |
||
|
Cangzhou, Hebei, China
इस आपूर्तिकर्ता को अपनी जांच भेजें